Takes the input from the analog card. Outputs a scaled value and HH/HI/LO/LL alarms. Maintenance override switch functionality.

This block limits an input depending on the configured high and low values and transfer the value to the output depending on the limits.

This module converts an analog value to its exponent (i.e exp + mantissa).

The Analog Output AOI Control Module is used to condition an engineering unit analog output value into the proper range for analog output modules and devices. Note: Programmed followed ISA88, ISA95 and ISA106 Standard

The Analog Input AOI Control Module is used to condition analog input signals into usable values for indication, control, and/or alarming by components of the PLC program or other systems (HMI, MES, etc.) Note: Programmed followed ISA88, ISA95 and ISA106 Standard

This module provide analog scaling and alarming for an input with an raw value of 0-27648 (4-20 ma).