PLC Only

Function that is used in the PLC code but does not required a HMI graphical interface.

Picture of Limit real
Limit real

This block limits an input depending on the configured high and low values and transfer the value to the output depending on the limits.

15.00 (CAD)
Picture of Loop (Value Incrementor)
Loop (Value Incrementor)

This module increases a value based on step size and time interval.

25.00 (CAD)
Picture of Low Level Alarm
Low Level Alarm

This module sets an alarm when the measured value falls below the Low Level setpoint for longer than the Time value.

10.00 (CAD)
Picture of LowHighAverageSelect
LowHighAverageSelect

The module selects the high, low or average value of 5 analog inputs.

25.00 (CAD)
Picture of Machine_run_time
Machine_run_time

This piece of code is provided as a ladder coded Routine.

3.00 (CAD)
Picture of Module Network Monitor
Module Network Monitor

This AOI is to be used in order to monitor and check for any Data interruption between the MAIN CPU and the selected connected MODULE.

25.00 (CAD)