PLC Only

Function that is used in the PLC code but does not required a HMI graphical interface.

FBD LAD program use
POSx_Valve_open_close

On/Off valve with a single output and both opened and closed. It also can be used without feedback - in that case ignore fail to open/close variable at the output. feedback. Applies to all pneumatic on/off valves with both opened and closed position feedback.

25.00 (CAD)
Picture of PowerFlex40 Monitor
PowerFlex40 Monitor

This module monitors the status of a PowerFlex 40 Drive.

25.00 (CAD)
Picture of Valve_Digital
Valve_Digital

The module provide control for an Digital Valve (Open/Close) as well as n HMI faceplate.

25.00 (CAD)
Picture of First In
First In

This module captures the first channel that goes into alarm.

25.00 (CAD)
Picture of Analog Module
Analog Module

The module scales the raw input to the Engineering Range and creates High High, High, Low and Low Low alarms.

25.00 (CAD)
Picture of First Out
First Out

This module monitors the status of 16 discrete inputs and sets the Alarm Channel No to the value of the input channel that first goes into alarm.

25.00 (CAD)