Function that is used in the PLC code but does not required a HMI graphical interface.
PLC Only
With AOI Exchange, developers can purchase pre-built PLC & HMI modules from approved vendors in our marketplace. Save countless hours of development time on your next project.Browse Modules
The BNOT16 block allows up to 16 Boolean conditions to be inverted. By using the BNOT16 block in application code the required inversion of signals is clearly shown within the Function Block Diagram (FBD).
25.00 (CAD)
FO16On
Used for First Out tripping and alarming. Inputs are set are set high to cause trip/alarm.
25.00 (CAD)
Latch16On
Used for latch an output ON when the corresponding input to the module goes ON.
25.00 (CAD)
Latch16Off
Used for latch an output OFF when the corresponding input to the module goes OFF.
25.00 (CAD)
Gate16ON
When the module is enabled the state of the 16 discrete inputs is copied to the outputs.
25.00 (CAD)
LowHighAverageSelect
The module selects the high, low or average value of 5 analog inputs.