The Analog Input AOI Control Module is used to condition analog input signals into usable values for indication, control, and/or alarming by components of the PLC program or other systems (HMI, MES, etc.) Note: Programmed followed ISA88, ISA95 and ISA106 Standard

The Analog Output AOI Control Module is used to condition an engineering unit analog output value into the proper range for analog output modules and devices. Note: Programmed followed ISA88, ISA95 and ISA106 Standard

The Digital Input AOI Control Module is used for general-purpose discrete inputs. Note: Programmed followed ISA88, ISA95, and ISA106 Standard

Digital Output Control Module Note: Programmed followed ISA88, ISA95, and ISA106 Standard

The Valve AOI Control Module can handle a spring return fail open, spring return fail close, or fail last valve. The valve can have one or two solenoids. It can have an open limit switch, or not. It can have a close limit switch, or not. Note: Programmed followed ISA88, ISA95, and ISA106 Standard

Count the operating time of equipment

Counting operating hour

count the operating time of equipment in 1 cycle from ON to OFF

AOI for 1 in 2 out Linear Cylinder Control and fault report.

AOI for 2 in 1 Out Linear Cylinder Control and fault report.

AOI for 2 in 2 out Linear Cylinder Control and fault report.

reads the PLC date and returns a value from 1 to 7 as an integer value for the day of the week

When your Digital input has an OK state and Alarm state, you need to process it before you shall use it. For example, Safety System, Lift Door, Emergency Switch, an application where input states false or low shall give an alarm.

User-defined function block for CCW aimed at controlling hydraulic systems comprising of a single general proportional control valve and up to 4 bidirectional 4/3 on/off valves.

The module is used to prove the seal of a valve.

Double Solenoid 2 position operation