The Analog Output AOI Control Module is used to condition an engineering unit analog output value into the proper range for analog output modules and devices. Note: Programmed followed ISA88, ISA95 and ISA106 Standard

The Analog Input AOI Control Module is used to condition analog input signals into usable values for indication, control, and/or alarming by components of the PLC program or other systems (HMI, MES, etc.) Note: Programmed followed ISA88, ISA95 and ISA106 Standard

A variable input that you want a non-linear varied output.

Device change over if one duty and one standby device. PLCOpen XML file developed for Schneider Electric M251 PLC. And it's compatible with M241 and M262 PLCs also.

Bypass Control

The BNOT16 block allows up to 16 Boolean conditions to be inverted. By using the BNOT16 block in application code the required inversion of signals is clearly shown within the Function Block Diagram (FBD).

The module populates the status of bits into a integer.

The module provides On-Off control based on 2 setpoints.

This AOI can be used to automate a gate system with either one or two gates. The type of gate (sliding door or swing door) does not matter. For safety purposes, a safety scanner input is also integrated into the system.

This module is for anti fire fighting sprinkle system. It consists of one pressure switch and two pumps controlled via VFD.

8 input REAL value, find minimum. maximun and average. Except 0 if input value = 0, it won't be counted in sum and average

This module provide analog scaling and alarming for an input with an raw value of 0-27648 (4-20 ma).

Scales analog input

A comprehensive Analog output module providing different features.

The module scales the raw input to the Engineering Range and creates High High, High, Low and Low Low alarms.

A comprehensive Analog Input module providing many features.

In this project AB HMI PV800 connect to Siemens S7-1214 PLC on MODBUS TCP/IP communication, and also this project has browser based scada (HMS EWON flexy 202 with GSM card and Viewon)

The module processes the 2 analog inputs and provides one analog output.