The module is used to control a fixed speed motor with all alarms and faults interlock.

This AOI is to be used in order to monitor and check for any Data interruption between the MAIN CPU and the selected connected MODULE.

This piece of code is provided as a ladder coded Routine.

The module selects the high, low or average value of 5 analog inputs.

This module sets an alarm when the measured value falls below the Low Level setpoint for longer than the Time value.

This module increases a value based on step size and time interval.

This block limits an input depending on the configured high and low values and transfer the value to the output depending on the limits.

This module is Used to Maintain Water or oil between some Levels

The module periodically grabs data (digital and Analog) and stores the data in a buffer with timestamp.

Used for latch an output ON when the corresponding input to the module goes ON.

Used for latch an output OFF when the corresponding input to the module goes OFF.

The module determines the day of the year and presents the value as a string.