This module controls a Motorized Smoke Dampers used in Environmental control systems.

This module is used to condition the status of a Motor Operated Valve.

This module provides comprehensive control function for a Direct On Line motor.

The module is used to control a motor in Manual or Automatic mode.

The module is used to control a fixed speed motor.

The module provides motor control with thermal overload and HMI Faceplate.

This AOI controls a single speed motor and is interfaced with a HMI graphic.

Module for control motor in 2 directions

The module is used to control a fixed speed motor with all alarms and faults interlock.

This AOI is to be used in order to monitor and check for any Data interruption between the MAIN CPU and the selected connected MODULE.

This piece of code is provided as a ladder coded Routine.

The module selects the high, low or average value of 5 analog inputs.

This module sets an alarm when the measured value falls below the Low Level setpoint for longer than the Time value.

This module increases a value based on step size and time interval.

This block limits an input depending on the configured high and low values and transfer the value to the output depending on the limits.

This module is Used to Maintain Water or oil between some Levels