This module allow for the run time value of a piece of equipment (e.g. pump) to be recorded for a maximum of 3 shifts.

This add-on instruction counts the number of HIGH bit/s in an integer (INT) or double integer (DINT). Counter that counts anything that can become active at the same time and recounts if anything changes.

Ladder logic code for sequencing applications. A universal code structure that can be used for all sequences. Built in RSLogix Ver 20, so should be compatible with most programming versions.

The program is designed to govern any sequential order of tasks done by outputs with basic feedback from inputs.

The AOI provides a sensor signal to be treated according to its authenticity proof. The AOI is mainly developed to be used with any industrial protocol sensor/gateway/module (ex. Modbus sensor/gateway, remote IO etc), but could be used with any analog measured value.

This block selects between the first or the second group of real variables.

This is a converted function block from the RS Logix 500 SCP instruction with added features. For STEP 7 V5.x (S7-300 & S7-400 PLCs)

Scantime function that can return scantime cycle in microseconds, milliseconds and/or seconds.

Analog Raw Value from Sensors Scaling to real Value

SCALE_AI Add on instruction converts raw value from Analog Input channel to engineering value and in addition presents several alarms based on user configuration, including Hi, HiHi, Lo and LoLo Alarms.

The module is used to create the runtime value for a condition.

The module reverses an ASCII string.

Reference signal generator creating output value from preset during the time period.

This module allows recipes to be slected and stored in a PLC. An HMI application is included for FactoryTalk ME.

This module generates a random number (data type: Real) between 0 and 1.

Ramp Function Generator

Ramp block that generates a ramp using acceleration and deceleration values defined by user.

The module decreases a value when triggered.

The module provides control of a pump (or motor).

This module provides Automatic and Manual control of a pump or motor.

AOI with SE Faceplate for Pump or Motor start stop