Count the operating time of equipment

Counting operating hour

count the operating time of equipment in 1 cycle from ON to OFF

AOI for 1 in 2 out Linear Cylinder Control and fault report.

AOI for 2 in 1 Out Linear Cylinder Control and fault report.

AOI for 2 in 2 out Linear Cylinder Control and fault report.

reads the PLC date and returns a value from 1 to 7 as an integer value for the day of the week

When your Digital input has an OK state and Alarm state, you need to process it before you shall use it. For example, Safety System, Lift Door, Emergency Switch, an application where input states false or low shall give an alarm.

User-defined function block for CCW aimed at controlling hydraulic systems comprising of a single general proportional control valve and up to 4 bidirectional 4/3 on/off valves.

The module is used to prove the seal of a valve.

Double Solenoid 2 position operation

This module alters the Daylight Saving Time setting of the PLC.

This module provides Duty Standby functionality suitable for pump control.

This module is used to interface the data read from and written to a E3Plus Relay using DeviseNet.\

Converts Milliseconds to Hours / Min / Seconds.

The module is used to control an Electric Heater in Manual or Automatic mode.

Studio 5000 - Rockwell Automation AOI Outputs - Julian Day, Day of Week, Is Leap Year and Current CPU Date/TIME

This module records the number of events in a 1 hour period.

This module monitors the state of the FCV and provides alarms based on the status read by the open and close limit switches.

This module captures the first channel that goes into alarm.

This module monitors the status of 16 discrete inputs and sets the Alarm Channel No to the value of the input channel that first goes into alarm.