Counting operating hour

AOI for 2 in 1 Out Linear Cylinder Control and fault report.

AOI for 1 in 2 out Linear Cylinder Control and fault report.

AOI for 2 in 2 out Linear Cylinder Control and fault report.

This module copies the state of the inputs to the outputs when enabled. Default state is off.

The module selects the high, low or average value of 5 analog inputs.

Bypass Control

Flow Rate Conversion (Mass)

Flow Rate Conversion (Volume)

Temperature Conversion

Used to replace standard faceplate in PlantPAX 2.0

Used to replace standard faceplate in PlantPAX 2.0

Used to replace standard faceplate in PlantPAX 2.0

When the module is enabled the state of the 16 discrete inputs is copied to the outputs.

Used for latch an output OFF when the corresponding input to the module goes OFF.

Used for latch an output ON when the corresponding input to the module goes ON.

Used for First Out tripping and alarming. Inputs are set are set high to cause trip/alarm.

The BNOT16 block allows up to 16 Boolean conditions to be inverted. By using the BNOT16 block in application code the required inversion of signals is clearly shown within the Function Block Diagram (FBD).