Contains a typical for digital Fail Close Valves with 1 solenoid and 2 limit switches. The valve closes if it is tripped or a command to close is set on it. Can receive manual operations like opening and closing the valve from a button(on the HMI).

reads the PLC date and returns a value from 1 to 7 as an integer value for the day of the week

Takes the input from the analog card. Outputs a scaled value and HH/HI/LO/LL alarms. Maintenance override switch functionality.

Takes the input from the analog card.Outputs a scaled value and HH/HI/LO/LL alarms. Can be imported as a library and it will create all the variables automatically or can be imported as a AOI.

The module provides On-Off control based on 2 setpoints.

This module records the number of events in a 1 hour period.

This module is used to interface the data read from and written to a E3Plus Relay using DeviseNet.\

This module is used to condition the status of a Motor Operated Valve.

The module provides an alarm bypass function for Analog and discrete inputs.

Used to replace standard faceplates in PlantPAX 2.0

This module provides simplified PID control where the additional functions provided with the advanced PID block are not required.

This module alters the Daylight Saving Time setting of the PLC.

This module allow for the run time value of a piece of equipment (e.g. pump) to be recorded for a maximum of 3 shifts.

This AOI reads the current time/date and also allows the PLC clock to be updated.

Flashes an output based on user specified time values.

Used to replace standard faceplate in PlantPAX 2.0

This AOI controls a single speed motor and is interfaced with a HMI graphic.

This module controls a Motorized Smoke Dampers used in Environmental control systems.

Scales analog input

This module inverts the state of each input to the corresponding output.

This function integrates anything you may need. Just set the parameters and you will have the output ready to use.