This piece of code is provided as a ladder coded Routine.

This module generates a random number (data type: Real) between 0 and 1.

This module is for anti fire fighting sprinkle system. It consists of one pressure switch and two pumps controlled via VFD.

A variable input that you want a non-linear varied output.

Elapse/Remaining Timers accumulated values conversion in clock format .

This module is Used to Maintain Water or oil between some Levels

This is a converted function block from the RS Logix 500 SCP instruction with added features. For STEP 7 V5.x (S7-300 & S7-400 PLCs)

In this project AB HMI PV800 connect to Siemens S7-1214 PLC on MODBUS TCP/IP communication, and also this project has browser based scada (HMS EWON flexy 202 with GSM card and Viewon)

count the operating time of equipment in 1 cycle from ON to OFF

The instruction uses to toggle the signal

Count the operating time of equipment

The module periodically grabs data (digital and Analog) and stores the data in a buffer with timestamp.

Module for control motor in 2 directions

This package is a complete solution that allows fast development and configuration of interlocks, a task that normally takes a lot of time. This works with 32 inputs and comes with four faceplate's sizes suitable for all types of HMI and SCADA systems.

The module is used to prove the seal of a valve.

The module decreases a value when triggered.

Indirect Addressing Concept For Scanning No.of Products to Avoid Duplicate Barcode Number when products are travelling through conveyor

The AOI provides a sensor signal to be treated according to its authenticity proof. The AOI is mainly developed to be used with any industrial protocol sensor/gateway/module (ex. Modbus sensor/gateway, remote IO etc), but could be used with any analog measured value.

The module produces a pulsed output based on the two input parameters.

The module determines the day of the year and presents the value as a string.

This AOI is to be used in order to monitor and check for any Data interruption between the MAIN CPU and the selected connected MODULE.