The Analog Input AOI Control Module is used to condition analog input signals into usable values for indication, control, and/or alarming by components of the PLC program or other systems (HMI, MES, etc.) Note: Programmed followed ISA88, ISA95 and ISA106 Standard

Spin coating is a technique used to spread uniform thin films on flat substrates by centrifugal force. Spin Coater ladder language programming and Human Machine Interface using PLC and touch panel

Reference signal generator creating output value from preset during the time period.

8 input REAL value, find minimum. maximun and average. Except 0 if input value = 0, it won't be counted in sum and average

Integer Value Move to BIT status (Version Studio5000 V32.02)

This piece of code is provided as a ladder coded Routine.

This module generates a random number (data type: Real) between 0 and 1.

This module is for anti fire fighting sprinkle system. It consists of one pressure switch and two pumps controlled via VFD.

A variable input that you want a non-linear varied output.

Elapse/Remaining Timers accumulated values conversion in clock format .

This module is Used to Maintain Water or oil between some Levels

This is a converted function block from the RS Logix 500 SCP instruction with added features. For STEP 7 V5.x (S7-300 & S7-400 PLCs)

In this project AB HMI PV800 connect to Siemens S7-1214 PLC on MODBUS TCP/IP communication, and also this project has browser based scada (HMS EWON flexy 202 with GSM card and Viewon)

count the operating time of equipment in 1 cycle from ON to OFF

The instruction uses to toggle the signal

Count the operating time of equipment