This module provides comprehensive control function for a Direct On Line motor.

This module provide analog scaling and alarming for an input with an raw value of 0-27648 (4-20 ma).

AOI with SE Faceplate for Pump or Motor start stop

The module provide control for an Digital Valve (Open/Close) as well as n HMI faceplate.

This module monitors the status of a PowerFlex 40 Drive.

On/Off valve with a single output and both opened and closed. It also can be used without feedback - in that case ignore fail to open/close variable at the output. feedback. Applies to all pneumatic on/off valves with both opened and closed position feedback.

The module is used to create the runtime value for a condition.

The module provide Lead Lag control for 2 motors.

The module provides control of a pump (or motor).

This module allows recipes to be slected and stored in a PLC. An HMI application is included for FactoryTalk ME.

Module for control of two-position actuator with feedback

The module provides motor control with thermal overload and HMI Faceplate.

The module processes the 2 analog inputs and provides one analog output.

The Add On Instruction is used for the control of an Industrial Safety Gate (Euchner MGB series).

The module stores a set of values (e.g. measurement) and provides their maximum, minimum and average values .

Manufacturing vessel mass indicator with scaling and interlocks with alarm settings

The module provides voting logic for 2 out of 3 inputs.

The module is used to control a motor in Manual or Automatic mode.

The module is used with Plant PAx motor modules to limit the motor start/stop and reverse functions.

The module is used to control a fixed speed motor with all alarms and faults interlock.

This module monitors the state of the FCV and provides alarms based on the status read by the open and close limit switches.