This module is Used to Maintain Water or oil between some Levels

Reference signal generator creating output value from preset during the time period.

The Valve AOI Control Module can handle a spring return fail open, spring return fail close, or fail last valve. The valve can have one or two solenoids. It can have an open limit switch, or not. It can have a close limit switch, or not. Note: Programmed followed ISA88, ISA95, and ISA106 Standard

Device change over if one duty and one standby device. PLCOpen XML file developed for Schneider Electric M251 PLC. And it's compatible with M241 and M262 PLCs also.

Ladder logic code for sequencing applications. A universal code structure that can be used for all sequences. Built in RSLogix Ver 20, so should be compatible with most programming versions.

This AOI can be used to automate a gate system with either one or two gates. The type of gate (sliding door or swing door) does not matter. For safety purposes, a safety scanner input is also integrated into the system.

Indirect Addressing Concept For Scanning No.of Products to Avoid Duplicate Barcode Number when products are travelling through conveyor

The Analog Output AOI Control Module is used to condition an engineering unit analog output value into the proper range for analog output modules and devices. Note: Programmed followed ISA88, ISA95 and ISA106 Standard

Works exactly like a for do loop in higher programming language but used in ladder logic

This function integrates anything you may need. Just set the parameters and you will have the output ready to use.

The Analog Input AOI Control Module is used to condition analog input signals into usable values for indication, control, and/or alarming by components of the PLC program or other systems (HMI, MES, etc.) Note: Programmed followed ISA88, ISA95 and ISA106 Standard

Used to replace standard faceplates in PlantPAX 2.0

This is a converted function block from the RS Logix 500 SCP instruction with added features. For STEP 7 V5.x (S7-300 & S7-400 PLCs)

This module is for anti fire fighting sprinkle system. It consists of one pressure switch and two pumps controlled via VFD.

Studio 5000 - Rockwell Automation AOI Outputs - Julian Day, Day of Week, Is Leap Year and Current CPU Date/TIME

User-defined function block for CCW aimed at controlling hydraulic systems comprising of a single general proportional control valve and up to 4 bidirectional 4/3 on/off valves.

In this project AB HMI PV800 connect to Siemens S7-1214 PLC on MODBUS TCP/IP communication, and also this project has browser based scada (HMS EWON flexy 202 with GSM card and Viewon)

Spin coating is a technique used to spread uniform thin films on flat substrates by centrifugal force. Spin Coater ladder language programming and Human Machine Interface using PLC and touch panel