This AOI controls a single speed motor and is interfaced with a HMI graphic.

Used to replace standard faceplate in PlantPAX 2.0

Flashes an output based on user specified time values.

This AOI reads the current time/date and also allows the PLC clock to be updated.

This module allow for the run time value of a piece of equipment (e.g. pump) to be recorded for a maximum of 3 shifts.

This module alters the Daylight Saving Time setting of the PLC.

This module provides simplified PID control where the additional functions provided with the advanced PID block are not required.

The module provides an alarm bypass function for Analog and discrete inputs.

This module is used to condition the status of a Motor Operated Valve.

This module is used to interface the data read from and written to a E3Plus Relay using DeviseNet.\

This module records the number of events in a 1 hour period.

The module provides On-Off control based on 2 setpoints.

reads the PLC date and returns a value from 1 to 7 as an integer value for the day of the week

This AOI is to be used in order to monitor and check for any Data interruption between the MAIN CPU and the selected connected MODULE.

The module determines the day of the year and presents the value as a string.

The module produces a pulsed output based on the two input parameters.

The module decreases a value when triggered.

The module is used to prove the seal of a valve.

This package is a complete solution that allows fast development and configuration of interlocks, a task that normally takes a lot of time. This works with 32 inputs and comes with four faceplate's sizes suitable for all types of HMI and SCADA systems.

The module periodically grabs data (digital and Analog) and stores the data in a buffer with timestamp.

count the operating time of equipment in 1 cycle from ON to OFF