The module periodically grabs data (digital and Analog) and stores the data in a buffer with timestamp.

This module is Used to Maintain Water or oil between some Levels

This block limits an input depending on the configured high and low values and transfer the value to the output depending on the limits.

This module increases a value based on step size and time interval.

This module sets an alarm when the measured value falls below the Low Level setpoint for longer than the Time value.

The module selects the high, low or average value of 5 analog inputs.

This piece of code is provided as a ladder coded Routine.

This AOI is to be used in order to monitor and check for any Data interruption between the MAIN CPU and the selected connected MODULE.

Module for control motor in 2 directions

The module is used to control a fixed speed motor with all alarms and faults interlock.

This AOI controls a single speed motor and is interfaced with a HMI graphic.

The module provides motor control with thermal overload and HMI Faceplate.

The module is used to control a fixed speed motor.

The module is used to control a motor in Manual or Automatic mode.

This module provides comprehensive control function for a Direct On Line motor.

This module is used to condition the status of a Motor Operated Valve.

This module controls a Motorized Smoke Dampers used in Environmental control systems.

This block is a multiplexer function. When a single input is on, the corresponding single output real value will be on.

This module inverts the state of each input to the corresponding output.

This module is used to control a conveyor motor as part of a Power & Free conveyor system.

This module controls the Load Switch Stopper as part of a Power and Free conveyor system.