This module alters the Daylight Saving Time setting of the PLC.

This module provides Duty Standby functionality suitable for pump control.

This module is used to interface the data read from and written to a E3Plus Relay using DeviseNet.\

Converts Milliseconds to Hours / Min / Seconds.

The module is used to control an Electric Heater in Manual or Automatic mode.

Studio 5000 - Rockwell Automation AOI Outputs - Julian Day, Day of Week, Is Leap Year and Current CPU Date/TIME

This module records the number of events in a 1 hour period.

This module monitors the state of the FCV and provides alarms based on the status read by the open and close limit switches.

This module captures the first channel that goes into alarm.

This module monitors the status of 16 discrete inputs and sets the Alarm Channel No to the value of the input channel that first goes into alarm.

Flashes an output based on user specified time values.

Use this control module to control output as on/off flashing output. An example may be 1s on, 2s Off flashlight. it also can be used for flashing a bit in HMI with set time durations.

Flow Rate Conversion (Mass)

Flow Rate Conversion (Volume)

Used for First Out tripping and alarming. Inputs are set are set high to cause trip/alarm.

Works exactly like a for do loop in higher programming language but used in ladder logic